Technical specifications
Data for all 13 HAW lining materials and both repair systems, from HAW's technical data sheets.
Compound Data
13 linings, by base material and temperature
Every HAW lining is selected and compounded for the customer's specific chemical environment. The base material and maximum service temperature below narrow the field — for a resistance rating against your exact chemical, concentration, and operating temperature, send us the details and we'll confirm the right compound.
Soft rubbers
7 products| Code | Base | Temp | Resistant to | Sheet |
|---|---|---|---|---|
| HAW-W01 | CIIR | ≤ 100 °C | hydrofluoric acid | |
| HAW-W03 | CR | ≤ 80 °C | acid at lower concentrations · lye, brines | |
| HAW-W06 | BIIR | ≤ 100 °C | alkaline and acids · oxidizing agents at lower and medium concentrations +1 | |
| HAW-W06L | BIIR | ≤ 100 °C | alkaline and acids · oxidizing agents at lower and medium concentrations +1 | |
| HAW-W08 | BIIR | ≤ 125 °C | nitric acid (up to 30%) · acid mixtures +1 | |
| HAW-W12 | CSM | ≤ 80 °C | alkaline and acidic media · oxidizing acids (with exceptions) | |
| HAW-W31 | IR/SBR | -45 to 100 °C | alkaline and acidic at medium concentrations |
Hard rubbers
5 products| Code | Base | Temp | Resistant to | Sheet |
|---|---|---|---|---|
| HAW-H05 | IR | ≤ 80 °C | alkaline and acid fluids with the exceptions of oxidizing fluids · aliphatic hydrocarbons (with exceptions) and alcohol | |
| HAW-H22 | IR | ≤ 130 °C | alkaline and acid fluids with parts of organic solvents | |
| HAW-H22R | IR | ≤ 125 °C | alkaline and acid fluids with the exception of oxidizing fluids | |
| HAW-H90 | IR | ≤ 100 °C | alkaline and acid fluids with the exceptions of oxidizing fluids · aliphatic hydrocarbons (with exceptions) and alcohol | |
| HAW-H94 | IR/SBR | ≤ 100 °C | alkaline and acid fluids with the exceptions of oxidizing fluids |
Resin lining and repair systems
3 productsSee how these compounds are applied on the Rubber Linings page.
Vulcanisation Capacity
Europe's largest autoclave
Autoclave dimensions and cure conditions available at the Bockenem facility.
6,000
mm
Max diameter
20,000
mm
Max length
150
°C
Cure temperature
Have a project to discuss?
Send us the scope, a drawing or a specification. Our engineers come back with a solution, a price and a programme.